Closet sliding doors

How to Measure Your Closet Opening for Sliding Doors

Measure your closet opening carefully before you order, since your York sliding door is made to the exact size you enter online.

Why this matters

Made to the measurement you enter.

Every door on the online order path is made to measure. That is what gets you an exact fit instead of a standard size that almost works. It also means the measurement you enter is the measurement you get, so it is worth taking your time.

What you'll need: a steel tape measure, a pencil, and paper to write your numbers down as you go. Measure twice before you order.

Step by step

Five steps to a measurement you can order against.

Measure the width

At the top, the middle, and the bottom of the opening. Use the smallest of the three numbers.

Measure the height

On the left side, the right side, and the middle. Use the smallest of the three numbers.

Check the opening is square

By comparing the two corner-to-corner diagonal measurements.

Note your floor

Carpet, hardwood, and uneven floors can all affect fit.

Write everything down

Then measure the whole opening a second time to confirm.

Common mistakes

What trips people up.

  • Measuring once instead of twice.
  • Measuring the old door instead of the opening itself.
  • Ignoring an uneven floor or a floor that slopes.
  • Forgetting to measure past the trim or baseboard where it affects the opening.

What happens next

Enter your measurements, get an instant price.

Enter your measurements into the online configurator to get an instant price. Once you order and pay online, your door is built to that exact size, and it's ready for pickup in Concord in 48 hours. The online order is pickup only in Concord. Delivery is not part of the online order, but we do arrange it case by case, off the platform, by phone or email.

FAQ

Frequently asked questions.

What if I measure wrong?

Because each door is built to the size you enter, take your time and measure twice. If you're not sure about your opening, call us before you order.

What tools do I need to measure?

A steel tape measure, a pencil, and paper. Nothing else.

Can someone measure it for me?

The online order works on self-measuring, so you take the measurements yourself using this guide. If your opening is unusual and you want to talk it through first, call us before you order.

Do you deliver, or is it pickup only?

Pickup only, in Concord. If you need delivery, call us and we'll work it out with you directly.

Configure and order online

Once you have your measurements, configure your doors and get an instant price.

Need delivery, or not sure about your measurements? Call York Home Products Inc. at (942) 996-9191.

York Home Products Inc. / 201 Millway Ave #28, Concord, ON L4K 5K8 / (942) 996-9191